Tail, brake and stop lamps
Long LED boards for two-wheeler, car and commercial vehicle lamps.
Industries › Automotive
Boards for vehicle lighting and electronics.
FR4 and aluminium MCPCBs for tail lamps, indicators, DRLs, interior lights and vehicle accessories.
LED tail-lamp and sequential indicator board. Illustration.
What we make
Built for heat, vibration and long hours.
Sequential indicators
Indicator boards with many LEDs in a row, driven in sequence.
DRL, fog and headlamp modules
Aluminium boards for high-power LEDs where heat decides the lamp's life.
Interior and number-plate lights
Small LED boards for cabin, boot and number-plate lighting.
In-car chargers and accessories
USB car chargers, battery indicators and accessory boards.
E-rickshaw and EV accessories
Indicator, display and lighting boards for electric three-wheelers.
What a good automotive board needs.
FR4 for strength
Glass-epoxy FR4 resists cracking under vibration and handles temperature swings better than paper laminates.
MCPCB for high-power LEDs
DRLs, fog lamps and headlamps need an aluminium base to carry heat away from the LEDs.
Mounting holes that hold
Keep mounting holes clear of copper and away from the edge, and size them for the screw and washer you use.
Shapes that fit the lamp
Lamp boards are rarely rectangles. Curved and stepped outlines are CNC routed or punched on a blanking tool for volume.
Copper for long LED strings
Long boards carry current end to end. Wider tracks or 70 µm copper keep voltage drop and heating down.
Tell us your test needs
Share the vibration, temperature or other validation your customer asks for, and we'll confirm what we can support before you order.
Questions about automotive boards.
Which material do you recommend for vehicle lamps?
FR4 for most lamp and indicator boards, and aluminium MCPCB for high-power LEDs such as DRLs and fog lamps.
Can you make odd-shaped lamp boards?
Yes. Curved and stepped outlines are CNC routed for samples and smaller lots, or punched on a blanking tool for volume.
Do you make multilayer automotive boards?
No. We make single-sided boards only, which covers most vehicle lighting and accessory boards.
Can you meet my customer's validation requirements?
Tell us what the requirement is before you order. We'll confirm what we can support for your board.
Send us your automotive board.
Share the Gerber, material and quantity and we'll quote.