Mobile charger and adapter PCBs
Compact flyback boards with the isolation slot punched in the same stroke as the outline. Charger PCB
Home › PCB manufacturer for Noida
PCB manufacturer for Noida, Greater Noida and Ghaziabad.
Single-sided PCBs in production volumes for manufacturers in Noida, Greater Noida and Ghaziabad: mobile charger, adapter, SMPS and LED driver boards, aluminium MCPCB for lighting, and appliance controls, made at our plant in Barwala, Haryana.
Minimum order 40 m² per design (≈ 16,000 pcs of 50 × 50 mm). Below 40 m², regular customers only, with a ₹2,500 development charge.
- Plant
- Plot 233, HSIIDC Industrial Estate, Barwala, District Panchkula, Haryana 134118
- Supplying
- Noida, Greater Noida, Ghaziabad
- Boards
- Single-sided only
- Materials
- FR1, CEM1, CEM3, FR4, aluminium MCPCB
- Capacity
- 10,000 m² per month
- Phone / WhatsApp
- +91 92549 72870
What we make for Noida manufacturers.
Production volumes of single-sided boards for the charger, power supply, lighting and appliance makers around Noida.
SMPS and power supply PCBs
Open-frame supplies for set-top boxes, routers, CCTV, displays and LED signage, laid out with proper creepage. SMPS PCBs
LED driver PCBs
Isolated and non-isolated drivers for bulbs, battens, panels and downlights. LED drivers
Battery charger PCBs
For inverter, two-wheeler and e-rickshaw batteries. Heavier copper carries the charging current. Battery chargers
LED bulb and lighting MCPCBs
Aluminium boards for bulbs, panels, battens and street lights, with ready dies for round bulb sizes. LED bulb PCB
Appliance and consumer electronics PCBs
Control boards for fans, appliances and consumer electronics. Appliances
Supplying Noida, Greater Noida and Ghaziabad.
For production buyers who need a dedicated single-sided supplier for charger, power and lighting boards, with a clear quote from the Gerber.
Noida
Phase 1 and Phase 2, Sector 63 and the Sector 80 industrial belt: mobile charger, adapter, power supply and electronics production. Charger PCBs
Greater Noida
Ecotech, Kasna and Surajpur: consumer electronics, appliance and electrical manufacturers. Appliance PCBs
Ghaziabad
Sahibabad, Loni Road and Meerut Road industrial areas: LED lighting, electrical and power-supply makers. LED PCBs
Delhi, Gurugram and Faridabad
Buyers in the rest of the capital region are covered on our Delhi NCR page. Delhi NCR
Why Noida buyers work with us.
Built for charger and adapter volumes
Charger and adapter boards run on our floor every day, on CEM1 and FR1 for mobile chargers and FR4 with 70 µm copper for battery chargers. Material guide
Isolation slot in the same stroke
The primary-to-secondary slot is punched with the outline on a blanking tool, or CNC routed. Our CAM team checks every gap against the creepage your product standard needs. Spacing guide
Capacity for volume
10,000 m² of single-sided board a month, with panels planned to get the most boards from every sheet. Production orders from 40 m² per design.
Your design stays private
We sign an NDA before files are shared if you need one, and every job runs under a job number and client ID, never your company name.
How a first order works.
1. Send the design
Gerber files, material, copper thickness and the quantity per design. An NDA is available before you share files.
2. CAM check and price
Our CAM team checks the file for spacing, creepage and panel layout, and we send a price.
3. Production
Runs start from 40 m² per design. Matching sizes use our ready dies, so there is no tooling charge.
4. Test and dispatch
Every lot is bare board tested, checked by an independent QC team and dispatched with its job number.
Questions? Answers.
Do you supply PCBs to Noida, Greater Noida and Ghaziabad?
Yes. We supply single-sided PCBs in production volumes to manufacturers in Noida, Greater Noida and Ghaziabad from our plant in Barwala, Haryana.
Is your factory in Noida?
No. Our only plant is at Plot 233, HSIIDC Industrial Estate, Barwala, District Panchkula, Haryana 134118. All boards are made there under one roof and dispatched to your factory in Uttar Pradesh.
Do you make mobile charger and adapter PCBs?
Yes. Single-sided charger and adapter boards on CEM1 or FR1, with the isolation slot punched with the outline or CNC routed. Battery charger boards run on FR4 with 70 µm copper.
Can you match the charger boards we buy today?
Yes. Send your Gerber or a sample board with the material, thickness and finish you use now, and we quote like for like.
How do I get a quote from Noida?
Send the Gerber files, material, copper thickness and quantity per design through the quote form on our website or on WhatsApp +91 92549 72870. Our CAM team checks the file and we send a price.
Can our team visit or audit the plant?
Yes, by appointment. Call or WhatsApp +91 92549 72870 to fix a time.
Do you make double-sided or multilayer boards?
No. We make single-sided boards only: FR1, CEM1, CEM3, FR4 and aluminium MCPCB.
Do you supply small quantities?
No. We are a B2B production supplier. New buyers start at 40 m² per design. Designs below 40 m² are run only for regular customers, with a ₹2,500 development charge.
What is the minimum order?
40 m² of board per design (part number), not 40 pieces. That is about 430 sq ft, or about 16,000 pcs of a 50 × 50 mm board. We supply production volumes to manufacturers. For regular customers only, designs below 40 m² can be run with a ₹2,500 development charge.
Also see: Charger PCB · SMPS and LED driver PCBs · LED bulb PCB · Delhi NCR · Haryana
Send us your design.
Attach the Gerber, tell us the material and quantity, and we will come back with a price.