Fan and appliance control PCBs
Regulator, controller and appliance boards on CEM1 or FR4, with mains spacing checked at CAM. Appliance PCBs
Home › PCB manufacturer for Ludhiana
PCB manufacturer for Ludhiana and Jalandhar. Single-sided boards from a plant you can visit.
Single-sided PCBs in production volumes for Punjab manufacturers in Ludhiana and Jalandhar: appliance and fan control boards, LED lighting MCPCBs, automotive accessory boards and power boards, made at our plant in Barwala, Panchkula district.
Minimum order 40 m² per design (≈ 16,000 pcs of 50 × 50 mm). Below 40 m², regular customers only, with a ₹2,500 development charge.
- Plant
- Plot 233, HSIIDC Industrial Estate, Barwala, District Panchkula, Haryana 134118
- Supplying
- Ludhiana Focal Points, Industrial Areas A and B, Jalandhar
- Boards
- Single-sided only
- Materials
- FR1, CEM1, CEM3, FR4, aluminium MCPCB
- Capacity
- 10,000 m² per month
- Phone / WhatsApp
- +91 92549 72870
What we make for Ludhiana manufacturers.
Production volumes of single-sided boards for the appliance, lighting, electrical and automotive accessory makers of Ludhiana and Jalandhar.
LED lighting MCPCBs
Aluminium boards with white solder mask for bulbs, panels, battens and street lights. Round bulb sizes run on our ready dies. Aluminium PCB (MCPCB)
DOB and emergency bulb PCBs
Ready dies for 82, 112 and 132 mm DOB boards and 40/46, 60/66 and 62 mm emergency bulb boards. DOB PCB
Automotive accessory PCBs
FR4 boards for lamps and vehicle electronics; aluminium boards where LEDs need to shed heat. Automotive PCBs
Battery charger and inverter PCBs
FR4 with 70 µm copper for battery chargers, inverters and industrial supplies. Charger PCB
SMPS, adapter and LED driver PCBs
Power boards with isolation slots punched or routed. LED driver PCB
Supplying Ludhiana and Jalandhar.
For appliance, lighting, electrical and automotive accessory makers who need a dedicated single-sided supplier in North India and the same approved board in every lot.
Ludhiana Focal Points
The planned industrial phases around the city: electrical, appliance and lighting assembly units buying boards by the month. Appliance PCBs
Ludhiana Industrial Areas A and B
The older industrial belt in the city: electrical goods and automotive accessory makers. Automotive PCBs
Jalandhar
Industrial estates and the Focal Point area: lighting, electrical and appliance makers. LED PCBs
Mohali and Derabassi
Units next to the tricity, closer to our plant, are covered on our Mohali page. Mohali
Why Ludhiana buyers work with us.
Close enough to check us
Our plant is in Panchkula district, on the Punjab side of Haryana. Visit by appointment before your first order and see the line that will run your boards. What to check on a visit
Approve before we cut
Our CAM team checks every Gerber for spacing, creepage and panel layout before we quote, and you approve a PDF of the final panel before any material is cut.
Independent QC, every lot
Our QC department is independent of production. Every lot is bare board tested and carries a job number back to its process records.
Punjab GST
We bill from our Haryana GSTIN, 06ADWFS7015E1ZT, so buyers in Ludhiana and Jalandhar are billed IGST under HSN 8534 00 00. PCB HSN code
How a first order works.
1. Send the design
Gerber files, material, copper thickness and the quantity per design. An NDA is available before you share files.
2. CAM check and price
Our CAM team checks the file for spacing, creepage and panel layout, and we send a price.
3. Production
Runs start from 40 m² per design. Matching sizes use our ready dies, so there is no tooling charge.
4. Test and dispatch
Every lot is bare board tested, checked by an independent QC team and dispatched with its job number.
Questions? Answers.
Do you supply PCBs to Ludhiana?
Yes. We supply single-sided PCBs in production volumes to manufacturers in Ludhiana, including the Focal Point phases and Industrial Areas A and B, from our plant in Barwala, Panchkula district, Haryana.
Do you supply Jalandhar?
Yes. We supply manufacturers in Jalandhar from the same Barwala plant, on the same terms as Ludhiana.
Is your factory in Ludhiana?
No. Our only plant is at Plot 233, HSIIDC Industrial Estate, Barwala, District Panchkula, Haryana 134118. All boards are made there and dispatched to your factory in Punjab.
Can I visit the plant before ordering?
Yes, by appointment. Call or WhatsApp +91 92549 72870 to fix a time. Visiting a PCB plant: what to check
Which material do fan regulator and appliance boards use?
Appliance controls usually run on CEM1 or FR4. We confirm the material after reviewing your design, and our CAM team checks mains spacing and creepage before we quote.
Can you match the boards we buy today?
Yes. Send your Gerber or a sample board with the material, thickness and finish you use now, and we quote like for like.
What GST do Ludhiana buyers pay?
Our invoices come from our Haryana GSTIN under HSN 8534 00 00, so buyers in Punjab are billed IGST. Confirm the current rate with your tax advisor.
Do you have ready dies for LED and DOB boards?
Yes. We hold 21 ready blanking dies for round bulb, emergency bulb, DOB, driver strip and charger sizes, so matching orders skip tool-making. Ready dies
Do you make double-sided or multilayer boards?
No. We make single-sided boards only: FR1, CEM1, CEM3, FR4 and aluminium MCPCB.
Do you supply small quantities?
No. We are a B2B production supplier. New buyers start at 40 m² per design. Designs below 40 m² are run only for regular customers, with a ₹2,500 development charge.
What is the minimum order?
40 m² of board per design (part number), not 40 pieces. That is about 430 sq ft, or about 16,000 pcs of a 50 × 50 mm board. We supply production volumes to manufacturers. For regular customers only, designs below 40 m² can be run with a ₹2,500 development charge.
Also see: Punjab & Himachal · Mohali · Chandigarh tricity · Visiting our plant · Appliance PCB · Aluminium PCB (MCPCB) · PCB HSN code
Send us your design.
Attach the Gerber, tell us the material and quantity, and we will come back with a price.